Breaking hammers are not unfamiliar to us. Breaking hammers are used for breaking work, which can effectively clean floating rocks and soil in rock gaps. The construction is carried out in a high-strength working environment, so the breaker will have some failures, so what work should we do in daily use to maintain normal use?
　　 1. Do an inspection
　　 The inspection of the breaker cannot be omitted, and it needs to be careful. Many breaker failures are caused by not paying attention to some small abnormalities.
　　2, avoid working in water, sediment
　　 In places such as water or sand, the use of breaking hammers may be relatively small, but it is not ruled out that they may be used. It is important to know that except for the drill rod, the rest of the hammer body cannot be immersed in water or sand. The parts of the breaker are afraid of water and soil. The piston of the breaker must be protected so that the breaker will be used for a longer time.
　　3, avoid continuous work
　　 Sometimes in order to complete the work as soon as possible, the breaker will continue to work, but do not work continuously on hard objects to prevent excessive oil temperature and damage to the drill rod.
　　4, avoid the hammer pushing heavy objects
　　Do not push heavy objects with the breaker, this will damage the breaker, and may also cause dangerous situations such as broken arms and rollovers.
　　 5. Prevent runaway
　　 When the breaker is working, the drill rod must always be perpendicular to the broken object, press the object tightly, and stop the operation immediately after breaking. Dry hitting does not seem to be a serious problem, but the damage to the breaker is great. Dry hitting will cause the main body bolt to loosen, the front body is damaged and the machine. So remember not to run empty.
　　 6. Drill rod shaking
　　 When the breaker is working, it is impossible to break without shaking the drill rod. It should be lowered as much as possible, otherwise it will affect the bolt and drill rod.
　　 The above is what the breaker manufacturer wants to share with you. If you want the breaker to be used for a long time without damage, then you need to do the above work. I hope to help you, and if you want to know, keep following us.